A572 Grade 55

2023-05-17 18:03:12 來源：鋼鐵之家閱讀量：0

牌號	A572 Grade 55
其他名稱
對應標準	ASTM A572/A572M-2018 高強度低合金鈷釩結構鋼技術規范 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
歸類	合金鋼
性能	強度

A572 Grade 55 化學元素成分含量(%)

	成分	C ^③	Si ^①	Mn ^{② ③}	P ^④	S ^④	Cu	Nb ^⑤	更多
Type 1	最小值	-	0.15	-	-	-	-	0.005	/
Type 1	最大值	0.25	0.4	1.35	0.03	0.03	0.2	0.05	/

	成分	C ^③	Si ^①	Mn ^{② ③}	P	S	Cu	V ^⑥	更多
Type 2	最小值	-	0.15	-	-	-	-	0.01	/
Type 2	最大值	0.25	0.4	1.35	0.03	0.03	0.2	0.15	/

	成分	C ^③	Si ^①	Mn ^{② ③}	P	S	Cu	V ^⑥	Nb ^⑤	更多
Type 3	最小值	-	0.15	-	-	-	-	0.01	0.005	V+Nb：0.02~0.15⑦
Type 3	最大值	0.25	0.4	1.35	0.03	0.03	0.2	0.15	0.05	V+Nb：0.02~0.15⑦

	成分	C ^③	Si ^①	Mn ^{② ③}	P	S	Cu	N	Ti	V	更多
Type 5	最小值	-	0.15	-	-	-	-	0.003	0.006	-	/
Type 5	最大值	0.25	0.4	1.35	0.03	0.03	0.2	0.015	0.04	0.06	/

① Plates to 1-1/2 in. [40 mm] Thick, Shapes with Flange or Leg Thickness to 3 in. [75 mm] inclusive, Sheet Piling, Bars, Zees, and Rolled Tees: Si≤0.40% .
Plates Over 1-1/2 in. [40 mm] Thick and Shapes with Flange Thickness Over 3 in. [75 mm]：Si 0.15~0.40%.
② Manganese, minimum, by heat analysis of 0.80 % (0.75 % by product analysis) shall be required for all plates over 3/8 in. [10 mm] in thickness; a minimum of 0.50 % (0.45 % by product analysis) shall be required for plates 3/8 in. [10 mm] and less in thickness, and for all other products. The manganese to carbon ratio shall not be less than 2 to 1.
③ For each reduction of 0.01 percentage point below the specified carbon maximum, an increase of 0.06 percentage point manganese above the specified maximum is permitted. up to a maximum of 1.60 %.
④ maximum phosphorus content of 0.04 % and a maximum sulfur content of 0.05 % are permitted for the following materials： Structural shapes， Sheet piling， Bars， Plates with widlhs up to and including 15 in. [380 mm].
⑤ Nb：Product analysis limits = 0.004~0.06 %.
⑥ V：Product analysis limits = 0.005~0.17%
⑦ Nb+V：Product analysis limits = 0.01~0.16%.

碳當量計算

A572 Grade 55 機械性能

抗拉強度 σ_b Mpa	屈服點 σ_s Mpa	斷后伸長率或延伸率 δ %
≥485	≥380	(in 50mm) ≥20

注：本資料來源于互聯網的公開資源整理，我們不保證這些資料的準確性、完整性和適用性。這些資料僅供您參考，不應用于任何商業用途或決策依據。本資料所記載的技術信息是說明產品的代表性特點和性能的參考值，對于因誤用或不當使用本資料所記載的信息等而造成的損害恕難承擔責任，敬請周知。

上一篇：E420DD
下一篇：HS 0-4-1

精品国产专区91在线图片,一本一本久久a久久,国产sm精品调教网站,久久青草一区二区三区

A572 Grade 55